OSCam Güncel Latest Oscam with emu

[kingsman]

oscam-git11854-802
* Add support Tongfang EMM

 

[kingsman]

oscam-git11855-802

Remove hard-coding CAIDs and switch to already built-in webif configuration
* Utilize already existed "Force Even SA" webif configuration instead of hard-coding CAIDs. For 1884 and 1856 cards, you must enable "Force Even SA" in order to have EMM working properly.

 

[kingsman]

oscam-git11856-802

Readd some CAK7 EMM processing code that was removed in 99e39871 and log improvement.
* Improve CAK7 log on T0 protocol card
* Re-add CAK7 EMM processing code that was accidentally removed in 99e39871

 

[kingsman]

oscam-git11857-802

* Simplify several Nagra CAK7 codes by using method in 989a01d0

 

[kingsman]

oscam-git11858-802

webif: Create default webserver SSL certificate
* when webif configured to use https and no certificate file is present
* X.509 ECDSA certificates with V3 extensions are created by default (RSA certificates for OpenSSL versions before 1.1.0)
* new option https_auto_create_cert (default = enabled)
* show OpenSSL version in startlog when webif started in https mode
* detect target OpenSSL version and show it in build log (next to compiler version)

 

[hercules]

Hey hello
you can also just use oscam again
if iPK and deb post

and maybe also for Linux, Ubuntu and Debian

 

[kingsman]

oscam-git11860-802

Changeset 11859
webif: Fix default webserver SSL certificate
* disable function when OpenSSL was build without support for elliptic curve cryptography (no-ec)
* fix typo in https_auto_create_cert variable configuration
Changeset 11860
Remove autype for CCCam and NewCamd network readers as it is no longer required.

 

[kingsman]

oscam-git11861-802

streamrelay: Fix incomplete log messages as s_client struct information was not properly initialized
* gbox: Suppress the "failed init" log message if this module is not configured

 

[intermedya]

ıpk yokmu

 

[kingsman]

oscam-git11862-802

config: fix empty [cache] block in oscam.conf
- function cache_should_save_fn always returned true for the options of CS_CACHEEX_AIO and CW_CYCLE_CHECK, even if no option was changed
- rework option check, ifdef statements and some code beautifying

 

[kingsman]

oscam-git11863-802

streamrelay: Remove orphaned anonymous clients from WebIf

 

[ghost2020]

The last version of oscam customized and compiled for vps (version Ubuntu.x64)

Description: This version is recommended for use on vps because it does not contain drivers for external readers or emulators.

As recommendations for this version, we recommend the following settings:

lb_mode = 2
lb_nbest_readers = 4
lb_nfb_readers = 4
lb_min_ecmcount = 10
lb_max_ecmcount = 9999
lb_reopen_seconds = 3600
lb_nok_tolerance = 50
lb_reopen_invalid = 0
lb_retrylimit = 250
lb_stat_cleanup = 24

I tried to make a more "fluid" version in traffic that would use less traffic and make it more fluid...

Unix Starttime: 1734718493
Starttime: 20.12.2024 20:14:53
Build Date: 20.12.2024 18:37:55
Version: 2.24.12-11863@58c12d43
Compiler: x86_64-linux-gnu-libdvbcsa
Box Type: generic (generic)
PID: 3327
TempDir: /tmp/.oscam
GBox tmp_dir: not defined using: /tmp/.oscam
ConfigDir: /usr/local/etc/
WebifPort: 8888

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Compressed pages: yes
SSL support: no
DVB API support: yes
DVB API with extended CW API support: yes
DVB API with Stream Relay support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API with NEUTRINO support: no
DVB API read-sdt charsets: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
Cache exchange AIO support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Clockfix with realtime clock: yes
IPv6 support: no

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: no
serial: no
constant CW: no
Pandora: no
ghttp: no
Streamrelay: yes

Reader support: yes

Nagra: yes
Nagra Merlin: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: no
cardreader_drecas: no
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: no
cardreader_sc8in1: no
cardreader_mp35: no
cardreader_smargo: no
cardreader_pcsc: no
cardreader_smartreader: no
cardreader_db2com: no
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: no

 

[kingsman]

oscam-git11864-802

Resolve "Compilation failed, where there is only TONGFANG reader selected"
* Fix compilation failed when READER_TONGFANG is selected alone.

 

[kingsman]

oscam-git11865-802

streamrelay: Improve module integration
* functional changes
* start streamrelay server as module
* display each connected streamrelay client on status page
* auto discover source stream address with fallback (dvbapi + radegast support)
* some rework on log output for better traceability in case of errors

* config options
* option 'Use stream client as Source Stream Host' has been renamed to 'Automatic host discovery' (new default=1)
* new option 'Relay User' (default=empty) which is used to authenticate the streamrelay clients on status page
* new option 'Relay Client Display Option' to toggle client/source stream information displayed on status page
* new option 'Reuse existing client' (default=0) to combine multiple connected streamrelay clients into single one displayed on status page
* new option 'Hide in WebIf' (default=0) to hide streamrelay clients on status page

 

[ghost2020]

I compiled the latest oscam version (v.11865) with the "nodeid_changer_detector" package and added emu for servers based on ubuntu 20.04.x64. Thanks to @Qu4k3 and @OnkelAtze.

 

[kingsman]

oscam-git11865-802
- add patch nodeid_changer_detector

 

[kingsman]

oscam-git11866-802 + patch nodeid

Re-add auto entitlement refresh function on CAK7 (accidentally removed in 99e39871)
* Re-add auto entitlement refresh function on CAK7 which was accidentally removed in 99e39871 (part 2 of 2)
* Re-add auto entitlement refresh function on CAK7 which was accidentally removed in 99e39871 (part 1 of 2)
* Delete unused reader-nagracak7.h file

 

[kingsman]

oscam-git11867-802

Several Makefile bug fixes
* Fix compiler hangs on FreeBSD because of grep issue
* Fix compiler hangs on some toolchains where include directory is not on /usr/include

 

[kingsman]

oscam-git11868-802

* Fix compiler hangs on Ubuntu as dir command can't be used there

 

[samy mohsen]

I need a copy for Ubuntu 20